Quantcast
Channel: Exchange Previous Versions - Setup, Deployment, Updates, and Migration forum
Viewing all 1246 articles
Browse latest View live
↧

MS Exchange 2010 Install "Cannot access registry" error

October 27, 2011, 6:28 am
$
0
0

I am attempting to install a fresh, new MS exchange 2010 instance on a MS Server 2008 R2 which is a GoDaddy Virtual Dedicated Server. It is currently failing on the pre-req check.

This is the pre-req error I am getting:

There was a problem accessing the registry on this computer. This may happen if the Remote Registry service is not running. It may also indicate a network problem or that the TCP/IP Netbios Helper service is not running.

I have already contacted GoDaddy and they told me I have full access to do whatever I need and that MS Exchange will work fine on one of their virtual dedicated servers. I am not sure if I believe them or not, but regardless, this is my first Exchange install and I am not sure if it is just me or if there is something else. Is there a series of steps that I can perform to debug this error. I already resolved all the other issues - this is the last one and I cannot figure it out.

I performed the following steps in an attempt to debug the issue.

1. I disabled the firewall on everything and restarted the "Readiness Checks" - same error

 

2. I disabled IPv6 by unchecking the checkbox "Internet Protocol Version 6 (TCP/IPv6)" under "Local Area Connection Properties" and restarted the "Readiness Checks" - same error

3. The "TCP/IP netbios helper" service is enabled and set to "Automatic"

4. Under "Advanced sharing settings" and then under "Home or Work" (which I assume is the "PRIVATE" network) - I disabled the "File and printer sharing" by clicking the radio button for "Turn off file and printer sharing" and then clicked "Save changes". Then went back in and enabled it by clicking the radio button for "Turn on file and printer sharing" and then clicked "Save changes" and restarted the "Readiness Checks" - same error

5. Under "Advanced sharing settings" and then under "Domain" - "Network Discovery", "File and printer sharing", and "Public folder sharing" are all currently on. The "Computer Browser" service is enabled and set to "Automatic"

This is so frustrating because I am so close.

BTW - I just recognized that I am getting this error for more than just the "Hub Transport Role Prerequisites" - I am getting it for the "Client Access Role Prerequisites" and the "Mailbox Role Prerequisites". Does that change anything?

PLEASE HELP!!

↧
Search

Event ID: 1007 Event Description: Failed to create or start performance logs with error: System.Runtime.InteropServices.COMException (0x80041326): The task is disabled. (Exception from HRESULT: 0x80041326)

November 28, 2013, 8:57 am
$
0
0

Thanks & Regards Anand Sunka MCSA+CCNA+MCTS

↧
↧

Bulk EX2010 Mailbox Creation via CSV for Existing AD Accounts

June 28, 2010, 1:01 pm
$
0
0

I have 1200 AD accounts in different domains in the same Forest, which now require full Exchange 2010 mailboxes.  I have these users listed in a CSV - does anyone have a Powershell script that will take the existing AD accounts and bulk enable them with  mailboxes?

 

Any assistance greatly appreciated.
↧

Update Rollup 9 Fails to install on HUB/CAS server

September 1, 2009, 9:49 pm
$
0
0
Hi,

I am running Exchange Server 2007 with SP1 (Update Rollup 7) on Windows Server 2003 R2 x64bit.

I am recieving the following error whilst attempting to update my HUB/CAS server with UR9:

The installer has encountered an unexpected problem installing this package. This may indicate a problem with this package. The error code is 2771

I have performed a log of the MSI to a txt file which i will include the related components at the end of this post.

Actions  I have taken:
- Performed install with Domain Administrator and Exchange Administrator Credentials
- Restarted Server
- Attempted to install update Rollup 8 (Same error)
- Confirmed correct (x64bit) version of update
- Imported HKLM/SOFTWARE/MICROSOFT/EXCHANGE/V8.0/ADMIN TOOLS from a working server which had RU7 installed.
- Output verbose log to .txt file

Links i have used:
http://exchangeshare.wordpress.com/2009/05/30/exchange-update-rollup-installation-it-is-not-nightmare/
http://social.technet.microsoft.com/Forums/en-US/exchangesoftwareupdate/thread/82be34fd-2a6e-4ace-9548-d81d59c68cd9
http://www.msxfaq.de/admin/rollup-troubleshoot.pdf

Notes:
- There are no interum updates installed
- I Performed a search for the GUID key (24B2C164-DE66-44FE-B468-A46D9D5E6B31}) provided in the Event ID: 1024 errors and they pointed to Update Rollup 4, And Update Rollup 7. Previously we had upgraded from 4-7

Below is a truncated version of the verbose log:
MSI (c) (24:44) [18:06:38:207]: Note: 1: 2205 2:  3: Condition
MSI (c) (24:44) [18:06:38:207]: Machine policy value 'EnforceUpgradeComponentRules' is 0
MSI (c) (24:44) [18:06:38:222]: SELMGR: ComponentId '{A4AFCAF6-4B97-4222-AF9C-064F92569DB7}' is registered to feature 'AdminTools', but is not present in the Component table.  Removal of components from a feature is not supported!
MSI (c) (24:44) [18:06:38:222]: Note: 1: 2771 2: AdminTools
MSI (c) (24:44) [18:06:38:222]: Note: 1: 2262 2: Error 3: -2147287038
MSI (c) (24:44) [18:06:38:238]: Transforming table Error.

MSI (c) (24:44) [18:06:38:238]: Transforming table Error.

MSI (c) (24:44) [18:06:38:238]: Note: 1: 2262 2: Error 3: -2147287038
MSI (c) (24:44) [18:06:38:254]: Transforming table Error.

MSI (c) (24:44) [18:06:38:254]: Transforming table Error.

MSI (c) (24:44) [18:06:38:254]: Note: 1: 2262 2: Error 3: -2147287038
DEBUG: Error 2771:  Upgrade of feature AdminTools has a missing component.
MSI (c) (24:A8) [18:06:38:285]: Transforming table Binary.

MSI (c) (24:A8) [18:06:38:285]: Transforming table Binary.

MSI (c) (24:A8) [18:06:38:285]: Note: 1: 2262 2: Binary 3: -2147287038
MSI (c) (24:A8) [18:06:38:301]: Transforming table Binary.

MSI (c) (24:A8) [18:06:38:301]: Transforming table Binary.

MSI (c) (24:A8) [18:06:38:301]: Note: 1: 2262 2: Binary 3: -2147287038
MSI (c) (24:A8) [18:06:38:301]: Note: 1: 2262 2: Error 3: -2147287038
MSI (c) (24:A8) [18:06:38:316]: Transforming table Error.

MSI (c) (24:A8) [18:06:38:316]: Transforming table Error.

MSI (c) (24:A8) [18:06:38:316]: Note: 1: 2262 2: Error 3: -2147287038
MSI (c) (24:A8) [18:06:38:316]: Transforming table Error.

MSI (c) (24:A8) [18:06:38:332]: Transforming table Error.

MSI (c) (24:A8) [18:06:38:332]: Note: 1: 2262 2: Error 3: -2147287038
DEBUG: Error 2826:  Control BottomLine on dialog ErrorDlg extends beyond the boundaries of the dialog to the right by 5 pixels
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2826. The arguments are: ErrorDlg, BottomLine, to the right
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2771. The arguments are: AdminTools, ,
MSI (c) (24:44) [18:06:39:926]: Note: 1: 2262 2: Error 3: -2147287038
MSI (c) (24:44) [18:06:39:926]: Transforming table Error.

MSI (c) (24:44) [18:06:39:941]: Transforming table Error.

MSI (c) (24:44) [18:06:39:941]: Note: 1: 2262 2: Error 3: -2147287038
MSI (c) (24:44) [18:06:39:941]: Transforming table Error.

MSI (c) (24:44) [18:06:39:957]: Transforming table Error.

MSI (c) (24:44) [18:06:39:957]: Note: 1: 2262 2: Error 3: -2147287038
MSI (c) (24:44) [18:06:39:957]: Product: Microsoft Exchange Server -- The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2771. The arguments are: AdminTools, ,

Action ended 18:06:39: CostFinalize. Return value 3.
MSI (c) (24:44) [18:06:39:957]: Doing action: FatalError
Action 18:06:39: FatalError.
Action start 18:06:39: FatalError.
MSI (c) (24:44) [18:06:39:972]: Transforming table CustomAction.

MSI (c) (24:44) [18:06:39:988]: Transforming table CustomAction.

MSI (c) (24:44) [18:06:39:988]: Note: 1: 2262 2: CustomAction 3: -2147287038
MSI (c) (24:44) [18:06:39:988]: Transforming table CustomAction.

MSI (c) (24:44) [18:06:40:004]: Transforming table CustomAction.

MSI (c) (24:44) [18:06:40:004]: Note: 1: 2262 2: CustomAction 3: -2147287038
MSI (c) (24:A8) [18:06:40:019]: Transforming table Binary.

MSI (c) (24:A8) [18:06:40:019]: Transforming table Binary.

MSI (c) (24:A8) [18:06:40:019]: Note: 1: 2262 2: Binary 3: -2147287038
MSI (c) (24:A8) [18:06:40:035]: Transforming table Binary.

MSI (c) (24:A8) [18:06:40:035]: Transforming table Binary.

MSI (c) (24:A8) [18:06:40:035]: Note: 1: 2262 2: Binary 3: -2147287038
MSI (c) (24:A8) [18:06:40:051]: Note: 1: 2262 2: Error 3: -2147287038
MSI (c) (24:A8) [18:06:40:051]: Transforming table Error.

MSI (c) (24:A8) [18:06:40:066]: Transforming table Error.

MSI (c) (24:A8) [18:06:40:066]: Note: 1: 2262 2: Error 3: -2147287038
MSI (c) (24:A8) [18:06:40:066]: Transforming table Error.

MSI (c) (24:A8) [18:06:40:082]: Transforming table Error.

MSI (c) (24:A8) [18:06:40:082]: Note: 1: 2262 2: Error 3: -2147287038
DEBUG: Error 2826:  Control BottomLine on dialog FatalError extends beyond the boundaries of the dialog to the right by 5 pixels
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2826. The arguments are: FatalError, BottomLine, to the right
Action 18:06:40: FatalError. Dialog created
MSI (c) (24:A8) [18:06:40:144]: Note: 1: 2731 2: 0
Action ended 18:06:41: FatalError. Return value 2.
Action ended 18:06:41: INSTALL. Return value 3.
↧

Installing Exchange 2010 SP1 Hub Transport keeps failing with an error "Service 'MSExchangeTransport' failed to reach status 'Running' on this server"

November 10, 2011, 7:27 pm
$
0
0

Hi guys,

I've been trying to install a DR Hub Transport/CAS (Exchange 2010 SP1 on Windows 2008 R2 Enterprise SP1) on a DR site, but the installation keeps failing. There are several errors and warnings logged in the application log at every atempt. These are the logegd events:

 

Log Name:      Application
Source:        MSExchange ADAccess
Date:          11/11/2011 9:32:08 AM
Event ID:      2101
Task Category: Topology
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      localhost
Description:
Process MSEXCHANGEADTOPOLOGYSERVICE.EXE (PID=2536). The configuration domain controller specified in a call to SetConfigDCName (local_dc_server) is unreachable. Exchange Active Directory Provider will select the configuration domain controller from the list of available domain controllers.

Log Name:      Application
Source:        MSExchange ADAccess
Date:          11/11/2011 9:32:08 AM
Event ID:      2102
Task Category: Topology
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      localhost
Description:
Process MSEXCHANGEADTOPOLOGYSERVICE.EXE (PID=2536). All Domain Controller Servers in use are not responding:
Local_dc_server
Remote_dc_server

Log Name:      Application
Source:        MSExchange ADAccess
Date:          11/11/2011 9:32:08 AM
Event ID:      2114
Task Category: Topology
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      localhost
Description:
Process MSEXCHANGEADTOPOLOGYSERVICE.EXE (PID=2536). Topology discovery failed, error 0x80040a02 (DSC_E_NO_SUITABLE_CDC). Look up the Lightweight Directory Access Protocol (LDAP) error code specified in the event description. To do this, use Microsoft Knowledge Base article 218185, "Microsoft LDAP Error Codes." Use the information in that article to learn more about the cause and resolution to this error. Use the Ping or PathPing command-line tools to test network connectivity to local domain controllers.

Log Name:      Application
Source:        MSExchange ADAccess
Date:          11/11/2011 9:33:07 AM
Event ID:      2601
Task Category: General
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      localhost
Description:
Process MSEXCHANGEADTOPOLOGY (PID=2536). When initializing a remote procedure call (RPC) to the Microsoft Exchange Active Directory Topology service, Exchange could not retrieve the SID for account <WKGUID=1A9E39D35ABE5747B979FFC0C6E5EA26,CN=Microsoft Exchange,CN=Services,CN=Configuration,...> - Error code=80040a01.
The Microsoft Exchange Active Directory Topology service will continue starting with limited permissions.

Log Name:      Application
Source:        MSExchange ADAccess
Date:          11/11/2011 9:33:07 AM
Event ID:      2501
Task Category: General
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      localhost
Description:
Process MSEXCHANGEADTOPOLOGY (PID=2536). The site monitor API was unable to verify the site name for this Exchange computer - Call=HrSearch Error code=80040a01. Make sure that Exchange server is correctly registered on the DNS server.

Log Name:      Application
Source:        MSExchange ADAccess
Date:          11/11/2011 9:34:07 AM
Event ID:      2604
Task Category: General
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      localhost
Description:
Process MSEXCHANGEADTOPOLOGY (PID=2536). When updating security for a remote procedure call (RPC) access for the Microsoft Exchange Active Directory Topology service, Exchange could not retrieve the security descriptor for Exchange server object localhost - Error code=80040a01.
The Microsoft Exchange Active Directory Topology service will continue starting with limited permissions.

 

 

The local DC and all remote DCs are up and accessible. The server is registered in DNS. IPv6 is enabled. The server has only 1 NIC and a static IP. It's a VM on EXS 4.1. There is no AV software installed. The same set of GP settings applies to the production HT/CAS and DR HT/CAS. Windows OS is fully patched. All Exchange prerequisites for Windows 2008 R2 have been installed as per http://technet.microsoft.com/en-us/library/bb691354.aspx. I'm running the installation under an account which is Domain/Enterprise/Schema admin.

The production Exchange servers run without any issues. There are 30 servers on the DR site (DC/apps/DBs/backup etc) and they all run without any issues.

Any idea?

Thanks





↧
↧

cannot expand publicfolder after migration to Exchange 2010

November 30, 2013, 6:40 am
$
0
0

Hello All,

I have migrated the Exchange 2007 to Exchange 2010 Sp3 RU2 and all task completed. All the mailboxes are moved to Exchange 2010 and Public folder replication is completed.

Removed the replica from old server.

As per the below link static ports are set: http://social.technet.microsoft.com/wiki/contents/articles/864.configure-static-rpc-ports-on-an-exchange-2010-client-access-server.aspx

I have checked couple weeks before i am able to connect public folder 2010 through outlook 2010. But now i am unable to connect the New Public folder Ex2010 from outlook.(Using connection status in outlook). Not sure what happened. I am able to see the ports are listening. Users able to connect through Webapp but not through outlook...

Any help is appreciated...

Regards, Bhoopat.



↧

Convert NSF to PST

March 18, 2008, 11:09 am
$
0
0
After migrate in the server from Lotus Notes to Exchange 2007, I need a tool for convert the local database to pst file.

Anybody know  any tool of Microsoft for this question? free?

Thanks a lot and sorry for my "english".
↧

Anybody know how to fix this?

December 2, 2013, 9:13 am
$
0
0

ExternalEmailAddress is mandatory for PublicFolder

Thanks in advance

↧
Search

After migration from exchange 2003 to 2010 one user is not receiving new emails to outlook

December 2, 2013, 7:23 pm
$
0
0

After migrating from exchange 2003 to 2010, i have one user who's not receiving new emails. When i check a webmail, there are new emails, but for some reason it's not being pushed to exchange server. 


↧
↧

CCR is not working

December 3, 2013, 12:59 am
$
0
0

Hello Experts,

I have exchange sever 2007 on windows server 2003 R2.  I have installed exchange server 2007 on windows cluster. My passive not is not taking up the charge, seeding is proper, databases are healthy and FSW is also on placed.

the issue is when I do a failover manually or automatically passive cannot taking up the databases online. I had reinstalled the passive node as well. All tests are successfully passed, heart beat is also fine.

Please suggest what to do.

↧

Exchange 2010 SP3, bounce back error

December 3, 2013, 1:24 pm
$
0
0

Hi Everyone,


I have one user that is getting an error when internal email is sent to him. It seems that if it is sent from one person to him it works fine. If he is included in a group then this error comes up.

They are using Exchange 2010 SP3, they have been setup and working fine for a while. I had SP2 on it, updated to SP3 because of this error but it still persists. Any help would be appreciated. I was thinking of installing the rollups to see if that would fix it, but would like some feedback if possible before doing this.


#554 5.2.0 STOREDRV.Deliver.Exception:StoragePermanentException.MapiExceptionJetErrorReadVerifyFailure; Failed to process message due to a permanent exception with message Cannot complete delivery-time processing. 16.55847:181D0000, 17.43559:00000000A6020000000000000000000000000000, 255.23226:5E270000, 255.27962:0A000000, 255.27962:0E000000, 255.27962:0A000000, 255.27962:9E000000, 255.17082:06FCFFFF, 0.18273:00000000, 4.21921:06FCFFFF, 255.27962:FA000000, 255.1494:0C000000, 255.1238:35000000, 1.36537:0B000658, 6.5587:0F0104800B00065803003A82, 4.33375:0F010480, 4.36685:0F010480, 1.36537:B0846680, 6.5587:0F010480B08466800B003A81, 4.64931:0F010480, 1.36537:00800800, 6.5587:0F01048000800800B0841336, 4.33375:0F010480, 4.13300:06FCFFFF, 0.37373:40001500, 4.45565:06FCFFFF, 4.43265:06FCFFFF, 4.63741:06FCFFFF, 0.55895:03001100, 4.5041:06FCFFFF, 4.4465:06FCFFFF, 4.6833:06FCFFFF, 0.50217:B0840110, 4.5093:06FCFFFF, 4.5318:06FCFFFF, 4.10104:06FCFFFF, 0.57449:0300DD3F, 4.6025:05000780, 4.5257:05000780, 4.4606:06FCFFFF, 255.1750:06FCFFFF, 0.26849:00000000, 255.21817:06FCFFFF ##

↧

i do have exchange 2007 with os 2003 connected to primary domain controller 2003 with additional domain controller 2008 for some reason domain controller 2003 stopped working so we removed it from network, exchange serer 2007 give me a massage that canno

December 4, 2013, 3:21 am
$
0
0
i do have exchange 2007 with os 2003 connected to  primary domain controller 2003 with additional domain controller 2008 for some reason domain controller 2003 stopped working so we removed it from network, exchange serer 2007 give me a massage that cannot find domain controller which has scheme master role  what should i do to make it work with domain controller 2008

heba

↧

How migrate Exchange 2003 to Exchange 2010

December 4, 2013, 12:24 pm
$
0
0

Hi Guys, 

I try to migrate Exchange 2003 to Exchange 2010.

Exchange 2003  has the event called "Microsoft exchange event" , which is throws through the server script, it has the following script:

<SCRIPT RunAt=Server Language=VBScript>

'------------------------------------------------------------------------------
'FILE DESCRIPTION: Exchange Server Event Script
'------------------------------------------------------------------------------

Option Explicit 

'------------------------------------------------------------------------------
' Global Variables
'------------------------------------------------------------------------------

'------------------------------------------------------------------------------
' Event Handlers
'------------------------------------------------------------------------------

' DESCRIPTION: This event is fired when a new message is added to the folder
Public Sub Folder_OnMessageCreated

dim amSession
        dim messTarget
        dim idMessage
        dim obj
        dim respuesta 
                
        set amSession = EventDetails.Session
        idMessage = EventDetails.messageID
        Set messTarget = amSession.GetMessage(idMessage, Null )

        Set obj = CreateObject("SIC_CorreoIncidente.Proceso")
        respuesta = obj.ProcesarCorreo(messTarget,amSession,43)
                
        Set amSession=nothing
        Set messTarget=nothing
        Set obj=nothing


End Sub

' DESCRIPTION: This event is fired when a message in the folder is changed
Public Sub Message_OnChange
End Sub

' DESCRIPTION: This event is fired when a message is deleted from the folder
Public Sub Folder_OnMessageDeleted
End Sub

' DESCRIPTION: This event is fired when the timer on the folder expires
Public Sub Folder_OnTimer
End Sub

</SCRIPT>

In Exchange 2010, I don't find where put this script; don't exist the event called "Microsoft Exchange Event", I saw that exchange 2010 has the web service EWS but I don't know to use that webservice. I have Outlook 2013 as well.

↧
↧

Send email problem using Exch 2010

December 4, 2013, 9:01 pm
$
0
0

Hi,

I already installed Exch2010 with coexistance with Exch2003.

Outlook client is using Internet Email (pop & smtp) to send and retrieve email.

I already delete the SMTP Outound at Exch2003 ESM.

Most of the Outlook client I have already change the IP address to point to the new Exch 2010. Email can send and out internal & external.

My problem is:

There are some user (7 users) that if I set smtp address of Outlook to new Exch2010 IP address, it keep prompt for username/password

But most of the Outlook client, i set the IP to new Exch2010, seem fine everything.

Why does it happen? any idea?

↧

Exchange 2003 sp2 Owa not working

December 5, 2013, 3:57 am
$
0
0

we have Exchange front end and backend server

OWA not working

OWA hosted only front end server and open with local host /exchange login prompt coming but notable to login

Backend server even notable open the local host /exchange not working

check system event logs 1009 and 1011 error is Generated

after that we have restart the Back end server now working fine

what is issue

Exchange 2003 sp2 6.5 standard please suggest what we need avoid this problems

↧
Search

any particular ports to open for exchange 2010

September 1, 2010, 11:57 am
$
0
0

here are the ports that were opened for exchange 2003:

smtp 25, http 80, https 443, pop 110, imap 143

For 2010, are there any particular additional ports that needs to be opened in the firewall forwarding?

↧

Issue with OOF and Busy Free information for mailbox credentials differents from user Windows credentials

December 5, 2013, 12:11 pm
$
0
0

Hi,

We are transiting organization exchange 2003 sp2 to exchange 2010.

The users open a windows session on the domaineA.rootA.local and they use another account for the email domainB.rootB.local. we are not in the forest resource scenario. the accounts on the forest which contains mailbox are also used to log on others servers and applications.

When moving the mailbox from exchange 2k3 to exchange 2k10, all is ok except for OOF and Busy/Free information on outlook for some computers.

1- Exchange 2k3 users see the Busy/Free information Exchange 2k10 users

2- Exchange 2k10 users see the busy/free Exhange 2k10 users (when i disabled the proxy ie setting then it works).

3- Exchange 2k10 users see the busy/free Exhange 2k3 users (when i disabled the proxy ie setting then it works).

4- OOF doesn't work "server unavailable" and the IIs logs shows that outlook send a request with the wrong account (domaineA.rootA.local) rather than  domainB.rootB.local

Exemple:
2013-12-04 10:10:32 10.251.0.246 POST /ews/exchange.asmx - 443 - 10.1.34.138 Microsoft+Office/14.0+(Windows+NT+6.1;+Microsoft+Outlook+14.0.6129;+Pro) 401 0 0 15
2013-12-04 10:10:32 10.251.0.246 POST /ews/exchange.asmx - 443 - 10.1.34.138 Microsoft+Office/14.0+(Windows+NT+6.1;+Microsoft+Outlook+14.0.6129;+Pro) 401 1 2148074254 0
2013-12-04 10:10:32 10.251.0.246 POST /ews/exchange.asmx - 443 domaineA\user1 10.1.34.138 Microsoft+Office/14.0+(Windows+NT+6.1;+Microsoft+Outlook+14.0.6129;+Pro) 500 0 0 15.

The test of autodiscovery works fine, certificat is approuved, the urls are OK, the exclusions in ie proxy is ok.

I follow the http://www.proexchange.be/blogs/exchange2007/archive/2009/07/14/your-out-of-office-settings-cannot-be-displayed-because-the-server-is-currently-unavailable-try-again-later.aspx

I have no problem with webmail. Office standard 2010 32 bits. I tried to disable Windows Authentification for EWS and AUTODISCOVER, it still the same problem. 

Then, when i force outlook setting to ask credentials. the user when he starts outlook an authentification windows appears asking credentials, then the oof, busy free information works well. and IIS server logs show that outlook send a request with the correct account domainB.rootB.local.

could you please help me to understand and fix this ?

Thanks

↧
↧

exchange-ost data files

December 20, 2010, 10:12 am
$
0
0

need help please...I no longer use an exchangeserver/account so I checked the "help" file to remove an account...

after reading how to create a pst I removed the exchange account not knowing it would remove all of the folders, emails and contacts from outlook 2007/windows7. Can someone help me restore the ost data?

Thank you,

md33

↧

vss problems after sp3 install

July 22, 2010, 3:28 pm
$
0
0

I wanted to repost this here since I haven't seen any MS response in the HA/DR forum. We backup using vss on the passive node CCR cluster. Ever since we installed sp3 we are getting 214 event log errors on the active node and logs are not truncating when taking a full.

This doesn't appear to be related to the backup software in any way as I can reproduce the issue with vshadow and others have reported it with dpm (we are using appassure replay).

Here is the original post.

Backing up from the active node works fine and this is what we are doing until we can find a resolution to the problem. Thanks

↧

Event ID 214 - Exchange Server transaction log is not truncated properly

December 5, 2013, 5:56 pm
$
0
0

Problem: Event ID 214 is logged when you run a backup operation on a passive node after you install Exchange Server 2007 SP3 in an Exchange Server 2007 CCR environment

KB Article: http://support.microsoft.com/kb/2297394

Does that means the backup still considered as successful consistency backup for all of the mailbox database ? eventhough the Transaction log is not truncated to the Mailbox DB?

Assuming I always do Full Backup with VSS enabled backup software, does the database consistency backup still matter with or without circular logging is in use ?

/* Server Support Specialist */

↧
Viewing all 1246 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>