I have setup a new exchange server within our office and I would like to set up remote OWA also. I've been gettign conflicting information on how to do this. Internally I can access remote.mydomain.com without a problem. but externally it's not working, I get our companies website instead.

I assume I need to set up a dns record pointing to the exchange sever. We are a remote office and get our internet wirelessly from our ips. 

i.e. 

Internet --> wireless antenna ( ex ip 31.31.31.31/internal ip 192.168.1.1) --> internal router (ip 192.168.0.1) --> exchange server (ip 192.168.0.10)

So if I'm setting up DNS records do the point at the  antenna ex ip? and do I need to set up any addition port forwarding on the antenna & router?

Hey guys,

I am moving the final mailboxes from my SBS2003 over to my Exchange 2010 box.  I saved the large mailboxes and the BES users for last.  My question is about the large mailboxes.  I tried moving one of the larger mailboxes and it says, "Mailbox size 3.9GB exceeds target quota 2.3GB".

Any idea's on how I can remove the quota?  I have read that I can't do anything in the EMC but I can add -IgnoreRuleLimitErrors to the Move cmdlet in the Shell.  I have tried that but I keep getting error's so I am assuming I am not typing it out the correct way.  When I try to do Set-MoveRequest -Identity "Username" -IgnoreRuleLimitErrors $true, I get an error that there is no move request.  When I try to type the line into the MoveRequest line, it just doesn't like my parameters.

Any suggestions for getting past this?

hi

I have Exchange 2013 fresh installation

certificate 3rd part

just I run the Exchange connectivity test I find the below error

 
 The Microsoft Connectivity Analyzer is attempting to test Autodiscover for migration@cocoda.com.
  Autodiscover was tested successfully.
 
 Additional Details
 
Elapsed Time: 14700 ms. 

 
 
 Test Steps
 
 Attempting each method of contacting the Autodiscover service.
  The Autodiscover service was tested successfully.
 
 Additional Details
 
Elapsed Time: 14700 ms. 

 
 
 Test Steps
 
 Attempting to test potential Autodiscover URL https://cocoda.com:443/Autodiscover/Autodiscover.xml
  Testing of this potential Autodiscover URL failed.
 
 Additional Details
 
Elapsed Time: 926 ms. 

 
 
 Test Steps
 
 Attempting to resolve the host name cocoda.com in DNS.
  The host name resolved successfully.
 
 Additional Details
 
IP addresses returned: 50.63.158.6

Elapsed Time: 731 ms. 

 

 Testing TCP port 443 on host cocoda.com to ensure it's listening and open.
  The port was opened successfully.
 
 Additional Details
 
Elapsed Time: 62 ms. 

 

 Testing the SSL certificate to make sure it's valid.
  The SSL certificate failed one or more certificate validation checks.
 
 Additional Details
 
Elapsed Time: 132 ms. 

 
 
 Test Steps
 
 The Microsoft Connectivity Analyzer is attempting to obtain the SSL certificate from remote server cocoda.com on port 443.
  The Microsoft Connectivity Analyzer wasn't able to obtain the remote SSL certificate.
 
 Additional Details
 
The certificate couldn't be validated because SSL negotiation wasn't successful. This could have occurred as a result of a network error or because of a problem with the certificate installation.

Elapsed Time: 100 ms. 

 

 Attempting to test potential Autodiscover URL https://autodiscover.cocoda.com:443/Autodiscover/Autodiscover.xml
  Testing of the Autodiscover URL was successful.
 
 Additional Details
 
Elapsed Time: 13772 ms. 

 
 
 Test Steps
 
 Attempting to resolve the host name autodiscover.cocoda.com in DNS.
  The host name resolved successfully.
 
 Additional Details
 
IP addresses returned: 168.187.77.72

Elapsed Time: 675 ms. 

 

 Testing TCP port 443 on host autodiscover.cocoda.com to ensure it's listening and open.
  The port was opened successfully.
 
 Additional Details
 
Elapsed Time: 669 ms. 

 

 Testing the SSL certificate to make sure it's valid.
  The certificate passed all validation requirements.
 
 Additional Details
 
Elapsed Time: 2217 ms. 

 
 
 Test Steps
 
 The Microsoft Connectivity Analyzer is attempting to obtain the SSL certificate from remote server autodiscover.cocoda.com on port 443.
  The Microsoft Connectivity Analyzer successfully obtained the remote SSL certificate.
 
 Additional Details
 
Remote Certificate Subject: CN=mail.cocoda.com, O=Heavy Engineering Industries & Shipbuilding Co.(KSC), L=Kuwait, S=Kuwait, C=KW, Issuer: CN=DigiCert SHA2 Secure Server CA, O=DigiCert Inc, C=US.

Elapsed Time: 1196 ms. 

 

 Validating the certificate name.
  The certificate name was validated successfully.
 
 Additional Details
 
Host name autodiscover.cocoda.com was found in the Certificate Subject Alternative Name entry.

Elapsed Time: 774 ms. 

 

 Certificate trust is being validated.
  The certificate is trusted and all certificates are present in the chain.
 
 Test Steps
 
 The Microsoft Connectivity Analyzer is attempting to build certificate chains for certificate CN=mail.cocoda.com, O=Heavy Engineering Industries & Shipbuilding Co.(KSC), L=Kuwait, S=Kuwait, C=KW.
  One or more certificate chains were constructed successfully.
 
 Additional Details
 
A total of 1 chains were built. The highest quality chain ends in root certificate CN=DigiCert Global Root CA, OU=www.digicert.com, O=DigiCert Inc, C=US.

Elapsed Time: 51 ms. 

 

 Analyzing the certificate chains for compatibility problems with versions of Windows.
  Potential compatibility problems were identified with some versions of Windows.
 
 Additional Details
 
The Microsoft Connectivity Analyzer can only validate the certificate chain using the Root Certificate Update functionality from Windows Update. Your certificate may not be trusted on Windows if the "Update Root Certificates" feature isn't enabled.

Elapsed Time: 148 ms. 

 

 Testing the certificate date to confirm the certificate is valid.
  Date validation passed. The certificate hasn't expired.
 
 Additional Details
 
The certificate is valid. NotBefore = 9/23/2014 12:00:00 AM, NotAfter = 1/17/2018 12:00:00 PM

Elapsed Time: 0 ms. 

 

 Checking the IIS configuration for client certificate authentication.
  Client certificate authentication wasn't detected.
 
 Additional Details
 
Accept/Require Client Certificates isn't configured.

Elapsed Time: 1466 ms. 

 

 Attempting to send an Autodiscover POST request to potential Autodiscover URLs.
  The Microsoft Connectivity Analyzer successfully retrieved Autodiscover settings by sending an Autodiscover POST.
 
 Additional Details
 
Elapsed Time: 8743 ms. 

 
 
 Test Steps
 
 The Microsoft Connectivity Analyzer is attempting to retrieve an XML Autodiscover response from URLhttps://autodiscover.cocoda.com:443/Autodiscover/Autodiscover.xml for usermigration@cocoda.com.
  The Autodiscover XML response was successfully retrieved.
 
 Additional Details
 
Autodiscover Account Settings
XML response:
<?xml version="1.0"?>
<Autodiscover xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
 <Response xmlns="http://schemas.microsoft.com/exchange/autodiscover/outlook/responseschema/2006a">
 <User>
 <DisplayName>Migration Testing</DisplayName>
 <LegacyDN>/o=Corp Organization/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=migration</LegacyDN>
 <DeploymentId>9ed30bfc-f119-4611-bf8b-f783414d1105</DeploymentId>
 </User>
 <Account>
 <AccountType>email</AccountType>
 <Action>settings</Action>
 <Protocol>
 <Type>EXCH</Type>
 <Server>602f7ca5-ecaa-4e63-9f83-8b9aed4f4450@cocoda.com</Server>
 <ServerDN>/o=Corp Organization/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=602f7ca5-ecaa-4e63-9f83-8b9aed4f4450@cocoda.com</ServerDN>
 <ServerVersion>73C08414</ServerVersion>
 <MdbDN>/o=Corp Organization/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=602f7ca5-ecaa-4e63-9f83-8b9aed4f4450@cocoda.com/cn=Microsoft Private MDB</MdbDN>
 <ASUrl>https://mail.cocoda.com/EWS/Exchange.asmx</ASUrl>
 <OOFUrl>https://mail.cocoda.com/EWS/Exchange.asmx</OOFUrl>
 <OABUrl>https://mail.cocoda.com/OAB/1664eb38-c89a-46a0-ba7d-1928741e992b/</OABUrl>
 <UMUrl>https://mail.cocoda.com/EWS/UM2007Legacy.asmx</UMUrl>
 <Port>0</Port>
 <DirectoryPort>0</DirectoryPort>
 <ReferralPort>0</ReferralPort>
 <PublicFolderServer>mail.cocoda.com</PublicFolderServer>
 <AD>DC02.CORP.NET</AD>
 <EwsUrl>https://mail.cocoda.com/EWS/Exchange.asmx</EwsUrl>
 <EmwsUrl>https://mail.cocoda.com/EWS/Exchange.asmx</EmwsUrl>
 <EcpUrl>https://mail.cocoda.com/ecp/</EcpUrl>
 <EcpUrl-um>?rfr=olk&amp;p=customize/voicemail.aspx&amp;exsvurl=1&amp;realm=CORP.NET</EcpUrl-um>
 <EcpUrl-aggr>?rfr=olk&amp;p=personalsettings/EmailSubscriptions.slab&amp;exsvurl=1&amp;realm=CORP.NET</EcpUrl-aggr>
 <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&amp;exsvurl=1&amp;IsOWA=&lt;IsOWA&gt;&amp;MsgID=&lt;MsgID&gt;&amp;Mbx=&lt;Mbx&gt;&amp;realm=CORP.NET</EcpUrl-mt>
 <EcpUrl-ret>?rfr=olk&amp;p=organize/retentionpolicytags.slab&amp;exsvurl=1&amp;realm=CORP.NET</EcpUrl-ret>
 <EcpUrl-sms>?rfr=olk&amp;p=sms/textmessaging.slab&amp;exsvurl=1&amp;realm=CORP.NET</EcpUrl-sms>
 <EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&amp;exsvurl=1&amp;FldID=&lt;FldID&gt;&amp;realm=CORP.NET</EcpUrl-publish>
 <EcpUrl-photo>PersonalSettings/EditAccount.aspx?rfr=olk&amp;chgPhoto=1&amp;exsvurl=1&amp;realm=CORP.NET</EcpUrl-photo>
 <EcpUrl-tm>?rfr=olk&amp;ftr=TeamMailbox&amp;exsvurl=1&amp;realm=CORP.NET</EcpUrl-tm>
 <EcpUrl-tmCreating>?rfr=olk&amp;ftr=TeamMailboxCreating&amp;SPUrl=&lt;SPUrl&gt;&amp;Title=&lt;Title&gt;&amp;SPTMAppUrl=&lt;SPTMAppUrl&gt;&amp;exsvurl=1&amp;realm=CORP.NET</EcpUrl-tmCreating>
 <EcpUrl-tmEditing>?rfr=olk&amp;ftr=TeamMailboxEditing&amp;Id=&lt;Id&gt;&amp;exsvurl=1&amp;realm=CORP.NET</EcpUrl-tmEditing>
 <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&amp;exsvurl=1&amp;realm=CORP.NET</EcpUrl-extinstall>
 <ServerExclusiveConnect>off</ServerExclusiveConnect>
 </Protocol>
 <Protocol>
 <Type>EXPR</Type>
 <Server>mail.cocoda.com</Server>
 <ASUrl>https://mail.cocoda.com/EWS/Exchange.asmx</ASUrl>
 <OOFUrl>https://mail.cocoda.com/EWS/Exchange.asmx</OOFUrl>
 <OABUrl>https://mail.cocoda.com/OAB/1664eb38-c89a-46a0-ba7d-1928741e992b/</OABUrl>
 <UMUrl>https://mail.cocoda.com/EWS/UM2007Legacy.asmx</UMUrl>
 <Port>0</Port>
 <DirectoryPort>0</DirectoryPort>
 <ReferralPort>0</ReferralPort>
 <SSL>On</SSL>
 <AuthPackage>Basic</AuthPackage>
 <CertPrincipalName>msstd:mail.cocoda.com</CertPrincipalName>
 <EwsUrl>https://mail.cocoda.com/EWS/Exchange.asmx</EwsUrl>
 <EmwsUrl>https://mail.cocoda.com/EWS/Exchange.asmx</EmwsUrl>
 <EcpUrl>https://mail.cocoda.com/ecp/</EcpUrl>
 <EcpUrl-um>?rfr=olk&amp;p=customize/voicemail.aspx&amp;exsvurl=1&amp;realm=CORP.NET</EcpUrl-um>
 <EcpUrl-aggr>?rfr=olk&amp;p=personalsettings/EmailSubscriptions.slab&amp;exsvurl=1&amp;realm=CORP.NET</EcpUrl-aggr>
 <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&amp;exsvurl=1&amp;IsOWA=&lt;IsOWA&gt;&amp;MsgID=&lt;MsgID&gt;&amp;Mbx=&lt;Mbx&gt;&amp;realm=CORP.NET</EcpUrl-mt>
 <EcpUrl-ret>?rfr=olk&amp;p=organize/retentionpolicytags.slab&amp;exsvurl=1&amp;realm=CORP.NET</EcpUrl-ret>
 <EcpUrl-sms>?rfr=olk&amp;p=sms/textmessaging.slab&amp;exsvurl=1&amp;realm=CORP.NET</EcpUrl-sms>
 <EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&amp;exsvurl=1&amp;FldID=&lt;FldID&gt;&amp;realm=CORP.NET</EcpUrl-publish>
 <EcpUrl-photo>PersonalSettings/EditAccount.aspx?rfr=olk&amp;chgPhoto=1&amp;exsvurl=1&amp;realm=CORP.NET</EcpUrl-photo>
 <EcpUrl-tm>?rfr=olk&amp;ftr=TeamMailbox&amp;exsvurl=1&amp;realm=CORP.NET</EcpUrl-tm>
 <EcpUrl-tmCreating>?rfr=olk&amp;ftr=TeamMailboxCreating&amp;SPUrl=&lt;SPUrl&gt;&amp;Title=&lt;Title&gt;&amp;SPTMAppUrl=&lt;SPTMAppUrl&gt;&amp;exsvurl=1&amp;realm=CORP.NET</EcpUrl-tmCreating>
 <EcpUrl-tmEditing>?rfr=olk&amp;ftr=TeamMailboxEditing&amp;Id=&lt;Id&gt;&amp;exsvurl=1&amp;realm=CORP.NET</EcpUrl-tmEditing>
 <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&amp;exsvurl=1&amp;realm=CORP.NET</EcpUrl-extinstall>
 <ServerExclusiveConnect>on</ServerExclusiveConnect>
 <EwsPartnerUrl>https://mail.cocoda.com/EWS/Exchange.asmx</EwsPartnerUrl>
 <GroupingInformation>Main-Office</GroupingInformation>
 </Protocol>
 <Protocol>
 <Type>WEB</Type>
 <Port>0</Port>
 <DirectoryPort>0</DirectoryPort>
 <ReferralPort>0</ReferralPort>
 <Internal>
 <OWAUrl AuthenticationMethod="Basic, Fba">https://mail.cocoda.com/owa/</OWAUrl>
 <Protocol>
 <Type>EXCH</Type>
 <ASUrl>https://mail.cocoda.com/EWS/Exchange.asmx</ASUrl>
 </Protocol>
 </Internal>
 <External>
 <OWAUrl AuthenticationMethod="Fba">https://mail.cocoda.com/owa/</OWAUrl>
 <Protocol>
 <Type>EXPR</Type>
 <ASUrl>https://mail.cocoda.com/EWS/Exchange.asmx</ASUrl>
 </Protocol>
 </External>
 </Protocol>
 <Protocol>
 <Type>EXHTTP</Type>
 <Server>mail.cocoda.com</Server>
 <ASUrl>https://mail.cocoda.com/EWS/Exchange.asmx</ASUrl>
 <OOFUrl>https://mail.cocoda.com/EWS/Exchange.asmx</OOFUrl>
 <OABUrl>https://mail.cocoda.com/OAB/1664eb38-c89a-46a0-ba7d-1928741e992b/</OABUrl>
 <UMUrl>https://mail.cocoda.com/EWS/UM2007Legacy.asmx</UMUrl>
 <Port>0</Port>
 <DirectoryPort>0</DirectoryPort>
 <ReferralPort>0</ReferralPort>
 <SSL>On</SSL>
 <AuthPackage>Ntlm</AuthPackage>
 <EwsUrl>https://mail.cocoda.com/EWS/Exchange.asmx</EwsUrl>
 <EmwsUrl>https://mail.cocoda.com/EWS/Exchange.asmx</EmwsUrl>
 <EcpUrl>https://mail.cocoda.com/ecp/</EcpUrl>
 <EcpUrl-um>?rfr=olk&amp;p=customize/voicemail.aspx&amp;exsvurl=1&amp;realm=CORP.NET</EcpUrl-um>
 <EcpUrl-aggr>?rfr=olk&amp;p=personalsettings/EmailSubscriptions.slab&amp;exsvurl=1&amp;realm=CORP.NET</EcpUrl-aggr>
 <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&amp;exsvurl=1&amp;IsOWA=&lt;IsOWA&gt;&amp;MsgID=&lt;MsgID&gt;&amp;Mbx=&lt;Mbx&gt;&amp;realm=CORP.NET</EcpUrl-mt>
 <EcpUrl-ret>?rfr=olk&amp;p=organize/retentionpolicytags.slab&amp;exsvurl=1&amp;realm=CORP.NET</EcpUrl-ret>
 <EcpUrl-sms>?rfr=olk&amp;p=sms/textmessaging.slab&amp;exsvurl=1&amp;realm=CORP.NET</EcpUrl-sms>
 <EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&amp;exsvurl=1&amp;FldID=&lt;FldID&gt;&amp;realm=CORP.NET</EcpUrl-publish>
 <EcpUrl-photo>PersonalSettings/EditAccount.aspx?rfr=olk&amp;chgPhoto=1&amp;exsvurl=1&amp;realm=CORP.NET</EcpUrl-photo>
 <EcpUrl-tm>?rfr=olk&amp;ftr=TeamMailbox&amp;exsvurl=1&amp;realm=CORP.NET</EcpUrl-tm>
 <EcpUrl-tmCreating>?rfr=olk&amp;ftr=TeamMailboxCreating&amp;SPUrl=&lt;SPUrl&gt;&amp;Title=&lt;Title&gt;&amp;SPTMAppUrl=&lt;SPTMAppUrl&gt;&amp;exsvurl=1&amp;realm=CORP.NET</EcpUrl-tmCreating>
 <EcpUrl-tmEditing>?rfr=olk&amp;ftr=TeamMailboxEditing&amp;Id=&lt;Id&gt;&amp;exsvurl=1&amp;realm=CORP.NET</EcpUrl-tmEditing>
 <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&amp;exsvurl=1&amp;realm=CORP.NET</EcpUrl-extinstall>
 <ServerExclusiveConnect>On</ServerExclusiveConnect>
 </Protocol>
 <Protocol>
 <Type>EXHTTP</Type>
 <Server>mail.cocoda.com</Server>
 <ASUrl>https://mail.cocoda.com/EWS/Exchange.asmx</ASUrl>
 <OOFUrl>https://mail.cocoda.com/EWS/Exchange.asmx</OOFUrl>
 <OABUrl>https://mail.cocoda.com/OAB/1664eb38-c89a-46a0-ba7d-1928741e992b/</OABUrl>
 <UMUrl>https://mail.cocoda.com/EWS/UM2007Legacy.asmx</UMUrl>
 <Port>0</Port>
 <DirectoryPort>0</DirectoryPort>
 <ReferralPort>0</ReferralPort>
 <SSL>On</SSL>
 <AuthPackage>Basic</AuthPackage>
 <CertPrincipalName>msstd:mail.cocoda.com</CertPrincipalName>
 <EwsUrl>https://mail.cocoda.com/EWS/Exchange.asmx</EwsUrl>
 <EmwsUrl>https://mail.cocoda.com/EWS/Exchange.asmx</EmwsUrl>
 <EcpUrl>https://mail.cocoda.com/ecp/</EcpUrl>
 <EcpUrl-um>?rfr=olk&amp;p=customize/voicemail.aspx&amp;exsvurl=1&amp;realm=CORP.NET</EcpUrl-um>
 <EcpUrl-aggr>?rfr=olk&amp;p=personalsettings/EmailSubscriptions.slab&amp;exsvurl=1&amp;realm=CORP.NET</EcpUrl-aggr>
 <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&amp;exsvurl=1&amp;IsOWA=&lt;IsOWA&gt;&amp;MsgID=&lt;MsgID&gt;&amp;Mbx=&lt;Mbx&gt;&amp;realm=CORP.NET</EcpUrl-mt>
 <EcpUrl-ret>?rfr=olk&amp;p=organize/retentionpolicytags.slab&amp;exsvurl=1&amp;realm=CORP.NET</EcpUrl-ret>
 <EcpUrl-sms>?rfr=olk&amp;p=sms/textmessaging.slab&amp;exsvurl=1&amp;realm=CORP.NET</EcpUrl-sms>
 <EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&amp;exsvurl=1&amp;FldID=&lt;FldID&gt;&amp;realm=CORP.NET</EcpUrl-publish>
 <EcpUrl-photo>PersonalSettings/EditAccount.aspx?rfr=olk&amp;chgPhoto=1&amp;exsvurl=1&amp;realm=CORP.NET</EcpUrl-photo>
 <EcpUrl-tm>?rfr=olk&amp;ftr=TeamMailbox&amp;exsvurl=1&amp;realm=CORP.NET</EcpUrl-tm>
 <EcpUrl-tmCreating>?rfr=olk&amp;ftr=TeamMailboxCreating&amp;SPUrl=&lt;SPUrl&gt;&amp;Title=&lt;Title&gt;&amp;SPTMAppUrl=&lt;SPTMAppUrl&gt;&amp;exsvurl=1&amp;realm=CORP.NET</EcpUrl-tmCreating>
 <EcpUrl-tmEditing>?rfr=olk&amp;ftr=TeamMailboxEditing&amp;Id=&lt;Id&gt;&amp;exsvurl=1&amp;realm=CORP.NET</EcpUrl-tmEditing>
 <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&amp;exsvurl=1&amp;realm=CORP.NET</EcpUrl-extinstall>
 <ServerExclusiveConnect>On</ServerExclusiveConnect>
 </Protocol>
 </Account>
 </Response>
</Autodiscover>
HTTP Response Headers:
request-id: 2c81e36b-44c1-4491-bef9-7b294fbfbb20
X-CalculatedBETarget: exchmbxsrv2.corp.net
X-DiagInfo: EXCHMBXSRV2
X-BEServer: EXCHMBXSRV2
Cache-Control: private
Content-Type: text/xml; charset=utf-8
Set-Cookie: ClientId=UEBICTWCUKNZYCGAG; expires=Sun, 17-Jan-2016 18:07:20 GMT; path=/; HttpOnly,X-BackEndCookie=S-1-5-21-1316263717-1140312803-1221922943-12758=u56Lnp2ejJqBy8uZmsfPnc3Sm83OntLLyZmd0p6Znp3Sz8vHysjGysbOyp3PgYHNz87K0s/N0s7Jq87Hxc/Ixc3K; expires=Mon, 16-Feb-2015 15:07:25 GMT; path=/Autodiscover; secure; HttpOnly
Server: Microsoft-IIS/8.5
X-AspNet-Version: 4.0.30319
Persistent-Auth: true
X-Powered-By: ASP.NET
X-FEServer: EXCHCASSRV2
Date: Sat, 17 Jan 2015 18:07:25 GMT
Content-Length: 10852

Elapsed Time: 8738 ms. 

 

 

Please need help

---

MCP MCSA MCSE MCT MCTS CCNA

HI

Our company is being bought and we need to change the email address for every recipient within the business group/user.

I have added the new domain to the Accepted Domains and have confirmed that if I manually change a users smtp address that mail flow works and the postmaster account receives email.

looking in the E-mail address policies section within the EMC we currently have 2 polices one for the current company policy call company.co.uk with a priority 1 and one called Default policy.

when I try to edit these I get a warning message which states that this policy was created with an earlier version of exchange I have looked on our exchange 2003 environment and have found the polices and can edit them.

Now my questions are 

1. should I create the policy on the exchange 2003 environment or 2010

2. if I create a new policy on the exchange 2010 environment what will happen to the old addresses?

3. I must be able to preserve the old addresses and must make the new address space the primary address?

if anyone could help with the steps required or if there are any gotcha to avoid.

thanks

Howzit guys

i have a question that is baffling me.

I have a CAS array setup pointing to a F5 and all is good. my question is as follows: If i bring in another CAS/HUB server (combined role) and i export the cert from the current CAS/HUB server, do i import it in the MMC under Personal and then do i need to run through the certificate setup and setup my names and then complete the setup?

Please can you assist with this?

thanks

Hey guys,

I'm now working at a new customer. They got multiple domestic forests and one resource forest.

Let’s call them…

Dom1.domestic

Dom2.domestic

Dom3.domestic

Int.resource

By the way different domains have been migrated with the Quest Migration Manager and still are in sync. So in order to be prepared for a QMM resync we always have set the needed permissions in the domestic forests. So they could sync properly to int.resource and FullAccess and Send-As are working fine.

This works for dom1.domestic and dom2.domestic because they got an own dedicated Exchange 2003 environment and so we are able to set the needed permissions in the EX2003 tabs in the AD objects even for shared mailboxes if they are created in the domestic domain.

But for dom3.domestic it works not, because it got no Exchange environment. So in this case you create a shared mailbox in int.resource and grant FullAccess permission via powershell for the account in dom3.domestic.

Although this is the way Microsoft intended it to work, unfortunately it does not. So I think that the granted permissions will not pass-through to the domestic domain.

Have you got any idea where I could start searching?

Kind regards,

Chris  

Hi Experts,

I am planning to migrate email accounts and mailboxes of my users that are in exampledomain.lcl to exampledomain.com.

The email accounts and mailboxes are primarily on exampledomain.lcl.

I have made a new VM and made a new AD forest with example.com domain where I have to move all email accounts and mailboxes, in such a way that email accounts with .lcl should be moved to .com domain, the users should get email from their .com domain email address. with that their mailboxes also should be moved to .com domain.

I am trying to figure out where to start and what could be the steps for migration.

Any guides, step by step tutorials or technet article references are highly appreciated.

Thank You......

I am beginning to move users between mailbox servers and I know there are some thresholds that you need to change.  If you don't I think it bombs on the move because of too many items or items that are too large.  Is there a document or does anyone have a standard practice with the commands I need to run to relax those settings?  The only other time I moved anyone, I used an ex employee's mailbox and just kept retrying it looking for errors until I had all the thresholds changed.  That was at another job though.  Thanks for any help you can give!

We are currently migrating lotus notes databases to exchange 2007 using the MS Lotus Transporter tool.

After the emails are finished migrating from lotus to exchange 2007 and it completes with no errors or warnings, is there a way to fully know if it transfered all the messages.

There is a few times that people advised me after we moves the email from lotus to exchange they were missing messages so I would migrate the mail a second time using the transporter tool and it was fine after that.

I need to know that it is copying all the messages over from lotus to exchange and was wondering the best way to know if it was truly 100% successful.

We are attempting to decommission an Exchange 2007 Server (single server). We have already gotten 2010 set up, installed, mailboxes moved and public folders moved. We went through and removed the replicas on the old server as well as removing the mailbox database and public folder database.

From this point we are attempting to Uninstall Exchange 2007 using either the Wizard or through cmd using setup.com /mode:uninstall after navigating to the Bin folder in the Exchange server. Each time however, we get the same error regardless of how we are doing it.

We uncheck all roles, hit Next, and it fails during the Readiness Check within 10 seconds on each role (Mailbox, Client Access, Hub Transport) each time saying: 'An error occurred while running the test. The Computer may be out of Memory, or the XML files have been modified. Parameter name: ConfigurationFileLocation'

I've gone through using ADSI Edit and removed the server from the Configuration>Services>SiteDomain>Administrative Groups>Exchange Administrative Groups>Serversand it was none existent in the Databases section.

Even after all of these steps I'm still getting the error about the memory or XML file issue. Is there a way to replace the XML files with 'clean' ones or a way to repair the existing ones? I'm just simply wanting to uninstall it at this point.

Thanks!

We have the exact same issue as this but our groups are already universal security group and we still have problem:

http://social.technet.microsoft.com/Forums/en-NZ/exchangesvrmigration/thread/2c953cb4-5411-4f72-beb9-6b4c16fd6685

 

The distribution-groups were upgraded to Exchange 2010.  User A can update the group from Outlook 2003 or OWA 2010 but not from Outlook 2010.  Anyone know the solution?

 

thanks

Hello,

I was wondering how many servers could we patch 'rollup' at the same time on Exchange 2007 SP3? Would it be possible to do all passive cluster node together or in 2 times? (I have about 20 servers).

And how many time I should estimate the update.

Hey Guys ,

 I'm facing an issue while installing exchange 2013 on existing 2010 organisation , below are the details . I'm installing it on test bed however i'm failing at organisation preparation stage.

I do have existing exchange 2010 on ma domain

I would really appreciate your help.

Configuring Microsoft Exchange Server

    Organization Preparation                                  FAILED
     The following error was generated when "$error.Clear();
          install-RuleCollection -Name:"ClassificationDefinitions" -DomainContro
ller $RoleDomainController;
          New-ClassificationRuleCollection -InstallDefaultCollection
        " was run: "Unable to continue processing classification rule collection
 payload for decryption or further validations. Payload may contain invalid data
.".

Thanks 

After my server crashed and I reinstalled Windows and ran Exchange installation in recover mode, I have been having issues trying to enable the certificate.

Import-ExchangeCertificate : Cannot import as there already is a certificate wi
th a thumbprint of .....

Enable-ExchangeCertificate : The certificate with thumbprint ..... was found but is not valid for use with Exchange Server
(reason: PrivateKeyMissing).

I then ran certutil repairstore...

C:\Users\Administrator.mydomain>certutil -repairstore my 12121212121212
================ Certificate 1 ================
Serial Number: 12121212121212

Issuer: SERIALNUMBER=07969287, CN=Go Daddy Secure Certification Authority, OU=ht
tp://certificates.godaddy.com/repository, O=GoDaddy.com, Inc., L=Scottsdale, S=A
rizona, C=US
NotBefore: 2010/08/12 01:08 PM
NotAfter: 2011/08/14 01:38 PM
Subject: CN=mydomain.org, OU=Domain Control Validated, O=mydomain.org
Non-root Certificate
Cert Hash(sha1): c2 87 8a 7d 99 17 10 43 17 6e 7f ac bf 26 8b 8f 6c 34 1e 04
No key provider information
Cannot find the certificate and private key for decryption.
CertUtil: -repairstore command FAILED: 0x80090010 (-2146893808)
CertUtil: Access denied.

C:\Users\Administrator.mydomain>

Please help.

Hey Guys ,

 I'm facing an issue while installing exchange 2013 on server 2012 R2  , below are the details . I'm installing it on test bed however i'm failing at organisation preparation stage.

Error:
The following error was generated when "$error.Clear();
install-RuleCollection -Name:"ClassificationDefinitions" -DomainController $RoleDomainController;
          New-ClassificationRuleCollection -InstallDefaultCollection
        " was run: "Unable to continue processing classification rule collection payload for decryption or further validations. Payload may contain invalid data.".

Please Help me 

Sandy Carlos

Anyway to recover an ost file when the original server is gone and the computer with the "orphaned" ost is now joined to a new domain?  Original server was W2K3 SP2 w/ E2K3 SP2.

 

My thoughts are to setup another "mock" server identical to the original server, rejoin this computer to the old domain and then try to deal with the security mismatch of the ost to the server?

 

There is enough information to rebuild the server exactly as it was before (including passwords).

 

Ideas?

 

Thank You,

 

Joe

I'm unable to install Exchange SP3 on SBS 2008 running Exchange 2007 SP2. I get the following error message:

Failed to initialize the logfile: Access to the path C:\ExchangeSetupLogs\ExchangeSetup.log is denied.

Setup will not continue.

Can anybody tell me how to solve this issue?

Tom.

We are upgrading from Exchange 2007 SP2 to SP3.

Exchange Server is on Windows 2008 Enterprise 64 bit OS -SP2

DC is on windows 2008 Enterprise 32 bit OS - SP2

When we run Exchange SP3 setup.exe GUI, it runs through the pre-requisites completely and then starts to configure the Hub Transport services but @ exactly 55% it throws an error window "Exchange Server Setup encountered an error"

On repeating this process i noticed it throws the same error at 55% while "Performance COunter Configuring". Please find below the entries of exchangesetup.log

[2/1/2015 1:09:30 PM] [0] **********************************************
[2/1/2015 1:09:30 PM] [0] Starting Microsoft Exchange 2007 Setup
[2/1/2015 1:09:30 PM] [0] **********************************************
[2/1/2015 1:09:30 PM] [0] Operating System version: Microsoft Windows NT 6.0.6002 Service Pack 2.
[2/1/2015 1:09:30 PM] [0] Setup version: 8.3.83.6.
[2/1/2015 1:09:30 PM] [0] Logged on user: chakfig\Administrator.
[2/1/2015 1:09:30 PM] [0] Command Line Parameter Name='mode', Value='Upgrade'.
[2/1/2015 1:09:30 PM] [0] Command Line Parameter Name='sourcedir', Value='J:\EXSP01\SP3'.
[2/1/2015 1:09:30 PM] [0] Command Line Parameter Name='fromsetup', Value=''.
[2/1/2015 1:09:30 PM] [0] ExSetupUI was started with the following command: '-mode:upgrade -sourcedir:J:\EXSP01\SP3 /FromSetup'.
[2/1/2015 1:09:30 PM] [0] Setup is choosing the domain controller to use
[2/1/2015 1:09:31 PM] [0] Setup is choosing a local domain controller...
[2/1/2015 1:09:35 PM] [0] Setup has chosen the local domain controller PGCDC.chakfig.local for initial queries
[2/1/2015 1:09:35 PM] [0] PrepareAD has been run, and has replicated to this domain controller; so setup will use PGCDC.chakfig.local
[2/1/2015 1:09:35 PM] [0] Setup is choosing a global catalog...
[2/1/2015 1:09:35 PM] [0] Setup has chosen the global catalog server PGCDC.chakfig.local.
[2/1/2015 1:09:35 PM] [0] Setup will use the domain controller 'PGCDC.chakfig.local'.
[2/1/2015 1:09:35 PM] [0] Setup will use the global catalog 'PGCDC.chakfig.local'.
[2/1/2015 1:09:35 PM] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
[2/1/2015 1:09:35 PM] [0] Exchange organization container for the organization is 'CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
[2/1/2015 1:09:35 PM] [0] Setup will search for an Exchange Server object for the local machine with name 'PGCVMEXG'.
[2/1/2015 1:09:35 PM] [0] Exchange Server object found : 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
[2/1/2015 1:09:35 PM] [0] The following roles are unpacked: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole 
[2/1/2015 1:09:35 PM] [0] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole 
[2/1/2015 1:09:35 PM] [0] The local server has some Exchange files installed.
[2/1/2015 1:09:35 PM] [0] Setup will use the path 'J:\EXSP01\SP3' for installing Exchange.
[2/1/2015 1:09:35 PM] [0] Setup will discover the installed roles from server object 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
[2/1/2015 1:09:35 PM] [0] 'BridgeheadRole' is installed on the server object.
[2/1/2015 1:09:35 PM] [0] 'ClientAccessRole' is installed on the server object.
[2/1/2015 1:09:35 PM] [0] 'MailboxRole' is installed on the server object.
[2/1/2015 1:09:35 PM] [0] The server is cluster type: 'None'.
[2/1/2015 1:09:35 PM] [0] The requested cluster type: 'None'.
[2/1/2015 1:09:35 PM] [0] The installation mode is set to: 'BuildToBuildUpgrade'.
[2/1/2015 1:09:35 PM] [0] An Exchange organization with name 'chakfig' was found in this forest.
[2/1/2015 1:09:35 PM] [0] Active Directory Initialization status : 'True'.
[2/1/2015 1:09:35 PM] [0] Schema Update Required Status : 'False'.
[2/1/2015 1:09:35 PM] [0] Organization Configuration Update Required Status : 'False'.
[2/1/2015 1:09:35 PM] [0] Domain Configuration Update Required Status : 'False'.
[2/1/2015 1:09:35 PM] [0] The locally installed version is 8.3.83.6.
[2/1/2015 1:09:35 PM] [0] Exchange Installation Directory : 'C:\Program Files\Microsoft\Exchange Server'.
[2/1/2015 1:09:35 PM] [0] The backup copy of the install path is 'C:\Program Files\Microsoft\Exchange Server'.
[2/1/2015 1:09:35 PM] [0] The backup copy of the previously installed version is '8.2.176.2'.
[2/1/2015 1:09:36 PM] [0] Setup is determining what organization-level operations to perform.
[2/1/2015 1:09:36 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value chakfig.
[2/1/2015 1:09:36 PM] [0] The installed .msi file is current for this version of setup.
[2/1/2015 1:09:36 PM] [0] RootDataHandler has 1 DataHandlers
[2/1/2015 1:12:38 PM] [0] End of Setup
[2/1/2015 1:12:38 PM] [0] **********************************************
[2/1/2015 2:17:36 PM] [0] **********************************************
[2/1/2015 2:17:36 PM] [0] Starting Microsoft Exchange 2007 Setup
[2/1/2015 2:17:36 PM] [0] **********************************************
[2/1/2015 2:17:36 PM] [0] Operating System version: Microsoft Windows NT 6.0.6002 Service Pack 2.
[2/1/2015 2:17:36 PM] [0] Setup version: 8.3.83.6.
[2/1/2015 2:17:36 PM] [0] Logged on user: chakfig\Administrator.
[2/1/2015 2:17:37 PM] [0] Command Line Parameter Name='mode', Value='Upgrade'.
[2/1/2015 2:17:37 PM] [0] Command Line Parameter Name='sourcedir', Value='J:\EXSP01\SP3'.
[2/1/2015 2:17:37 PM] [0] Command Line Parameter Name='fromsetup', Value=''.
[2/1/2015 2:17:37 PM] [0] ExSetupUI was started with the following command: '-mode:upgrade -sourcedir:J:\EXSP01\SP3 /FromSetup'.
[2/1/2015 2:17:41 PM] [0] Setup is choosing the domain controller to use
[2/1/2015 2:17:41 PM] [0] Setup is choosing a local domain controller...
[2/1/2015 2:17:43 PM] [0] Setup has chosen the local domain controller PGCDC.chakfig.local for initial queries
[2/1/2015 2:17:43 PM] [0] PrepareAD has been run, and has replicated to this domain controller; so setup will use PGCDC.chakfig.local
[2/1/2015 2:17:43 PM] [0] Setup is choosing a global catalog...
[2/1/2015 2:17:43 PM] [0] Setup has chosen the global catalog server PGCDC.chakfig.local.
[2/1/2015 2:17:43 PM] [0] Setup will use the domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:17:43 PM] [0] Setup will use the global catalog 'PGCDC.chakfig.local'.
[2/1/2015 2:17:43 PM] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
[2/1/2015 2:17:43 PM] [0] Exchange organization container for the organization is 'CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
[2/1/2015 2:17:43 PM] [0] Setup will search for an Exchange Server object for the local machine with name 'PGCVMEXG'.
[2/1/2015 2:17:43 PM] [0] Exchange Server object found : 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
[2/1/2015 2:17:43 PM] [0] The following roles are unpacked: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole 
[2/1/2015 2:17:43 PM] [0] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole 
[2/1/2015 2:17:43 PM] [0] The local server has some Exchange files installed.
[2/1/2015 2:17:43 PM] [0] Setup will use the path 'J:\EXSP01\SP3' for installing Exchange.
[2/1/2015 2:17:43 PM] [0] Setup will discover the installed roles from server object 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
[2/1/2015 2:17:43 PM] [0] 'BridgeheadRole' is installed on the server object.
[2/1/2015 2:17:43 PM] [0] 'ClientAccessRole' is installed on the server object.
[2/1/2015 2:17:43 PM] [0] 'MailboxRole' is installed on the server object.
[2/1/2015 2:17:43 PM] [0] The server is cluster type: 'None'.
[2/1/2015 2:17:43 PM] [0] The requested cluster type: 'None'.
[2/1/2015 2:17:43 PM] [0] The installation mode is set to: 'BuildToBuildUpgrade'.
[2/1/2015 2:17:43 PM] [0] An Exchange organization with name 'chakfig' was found in this forest.
[2/1/2015 2:17:43 PM] [0] Active Directory Initialization status : 'True'.
[2/1/2015 2:17:43 PM] [0] Schema Update Required Status : 'False'.
[2/1/2015 2:17:43 PM] [0] Organization Configuration Update Required Status : 'False'.
[2/1/2015 2:17:43 PM] [0] Domain Configuration Update Required Status : 'False'.
[2/1/2015 2:17:43 PM] [0] The locally installed version is 8.3.83.6.
[2/1/2015 2:17:43 PM] [0] Exchange Installation Directory : 'C:\Program Files\Microsoft\Exchange Server'.
[2/1/2015 2:17:43 PM] [0] The backup copy of the install path is 'C:\Program Files\Microsoft\Exchange Server'.
[2/1/2015 2:17:43 PM] [0] The backup copy of the previously installed version is '8.2.176.2'.
[2/1/2015 2:17:43 PM] [0] Setup is determining what organization-level operations to perform.
[2/1/2015 2:17:43 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value chakfig.
[2/1/2015 2:17:43 PM] [0] The installed .msi file is current for this version of setup.
[2/1/2015 2:17:43 PM] [0] RootDataHandler has 1 DataHandlers
[2/1/2015 2:17:47 PM] [0] Validating options for the 4 requested roles
[2/1/2015 2:17:47 PM] [0] UpgradeModeDataHandler has 5 handlers and 5 work units
[2/1/2015 2:17:52 PM] [0] Validating options for the 4 requested roles
[2/1/2015 2:17:52 PM] [0] UpgradeModeDataHandler has 5 handlers and 5 work units
[2/1/2015 2:17:53 PM] [0] **************
[2/1/2015 2:17:53 PM] [0] Setup will run the task 'test-setuphealth'
[2/1/2015 2:17:53 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $true -ExchangeVersion '8.3.83.6' -Roles 'Bridgehead' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools' -TargetDir 'C:\Program Files\Microsoft\Exchange Server''  
[2/1/2015 2:17:53 PM] [1] Beginning processing.
[2/1/2015 2:18:19 PM] [1] Beginning processing.
[2/1/2015 2:18:19 PM] [1] Administrator Active Directory session settings are:  View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local }'
[2/1/2015 2:18:19 PM] [1] Searching objects "PGCVMEXG" of type "Server" under the root "$null".
[2/1/2015 2:18:19 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:18:19 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:18:19 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
[2/1/2015 2:18:20 PM] [1] Ending processing.
[2/1/2015 2:18:20 PM] [1] Beginning processing.
[2/1/2015 2:18:20 PM] [1] Administrator Active Directory session settings are:  View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local }'
[2/1/2015 2:18:20 PM] [1] Searching objects of type "SmtpSendConnectorConfig" with filter "$null", scope "SubTree" under the root "Administrative Groups".
[2/1/2015 2:18:20 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:18:20 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
[2/1/2015 2:18:20 PM] [1] Ending processing.
[2/1/2015 2:18:20 PM] [1] Ending processing.
[2/1/2015 2:18:20 PM] [0] **************
[2/1/2015 2:18:20 PM] [0] Setup will run the task 'test-setuphealth'
[2/1/2015 2:18:20 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.3.83.6' -Roles 'ClientAccess' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools' -TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'  
[2/1/2015 2:18:20 PM] [1] Beginning processing.
[2/1/2015 2:18:26 PM] [1] Beginning processing.
[2/1/2015 2:18:26 PM] [1] Administrator Active Directory session settings are:  View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local }'
[2/1/2015 2:18:55 PM] [1] Searching objects of type "SmtpSendConnectorConfig" with filter "$null", scope "SubTree" under the root "Administrative Groups".
[2/1/2015 2:18:55 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:18:55 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
[2/1/2015 2:18:55 PM] [1] Ending processing.
[2/1/2015 2:18:55 PM] [1] Ending processing.
[2/1/2015 2:18:55 PM] [0] **************
[2/1/2015 2:18:55 PM] [0] Setup will run the task 'test-setuphealth'
[2/1/2015 2:18:55 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.3.83.6' -Roles 'ClientAccess' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools' -TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'  
[2/1/2015 2:18:55 PM] [1] Beginning processing.
[2/1/2015 2:19:01 PM] [1] Beginning processing.
[2/1/2015 2:19:01 PM] [1] Administrator Active Directory session settings are:  View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local }'
[2/1/2015 2:19:01 PM] [1] Searching objects "PGCVMEXG" of type "Server" under the root "$null".
[2/1/2015 2:19:01 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:19:01 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:19:01 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
[2/1/2015 2:19:01 PM] [1] Ending processing.
[2/1/2015 2:19:01 PM] [1] Ending processing.
[2/1/2015 2:19:01 PM] [0] **************
[2/1/2015 2:19:01 PM] [0] Setup will run the task 'test-setuphealth'
[2/1/2015 2:19:01 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.3.83.6' -Roles 'Mailbox' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools' -TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'  
[2/1/2015 2:19:01 PM] [1] Beginning processing.
[2/1/2015 2:19:04 PM] [1] Beginning processing.
[2/1/2015 2:19:04 PM] [1] Ending processing.
[2/1/2015 2:19:07 PM] [1] Beginning processing.
[2/1/2015 2:19:07 PM] [1] Administrator Active Directory session settings are:  View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local }'
[2/1/2015 2:19:07 PM] [1] Searching objects "PGCVMEXG" of type "Server" under the root "$null".
[2/1/2015 2:19:07 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:19:07 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:19:07 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
[2/1/2015 2:19:07 PM] [1] Ending processing.
[2/1/2015 2:19:08 PM] [1] Ending processing.
[2/1/2015 2:19:20 PM] [0] Setup is determining what organization-level operations to perform.
[2/1/2015 2:19:20 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value chakfig.
[2/1/2015 2:19:20 PM] [0] The installed .msi file is current for this version of setup.
[2/1/2015 2:19:20 PM] [0] RootDataHandler has 1 DataHandlers
[2/1/2015 2:19:20 PM] [0] **************
[2/1/2015 2:19:20 PM] [0] Setup will run the task 'Install-BridgeheadRole'
[2/1/2015 2:19:20 PM] [1] Setup launched task 'Install-BridgeheadRole -DomainController 'PGCDC.chakfig.local' -UpdatesDir 'J:\EXSP01\SP3\Updates''  
[2/1/2015 2:19:20 PM] [1] Beginning processing.
[2/1/2015 2:19:20 PM] [1] Attempting Install for BridgeheadRole.
[2/1/2015 2:19:20 PM] [1] The following roles are current: 
[2/1/2015 2:19:26 PM] [1] Reading components for role 'BridgeheadRole' from 'res://BridgeheadRoleDefinition.xml'
[2/1/2015 2:19:26 PM] [1] Found 22 components
[2/1/2015 2:19:26 PM] [1] Loaded component 'All Roles Common First - Run Once' with 10 task info blocks from 'res://AllRolesCommonFirst_RunOnce.xml'
[2/1/2015 2:19:26 PM] [1] Loaded component 'All Roles Common First' with 8 task info blocks from 'res://AllRolesCommonFirst.xml'
[2/1/2015 2:19:27 PM] [1] Loaded component 'All Roles Precompile Management Binaries' with 30 task info blocks from 'res://AllRolesPrecompileManagementBinaries.xml'
[2/1/2015 2:19:27 PM] [1] Loaded component 'Bridgehead Permissions Configuration' with 1 task info blocks from 'res://BridgeheadLocalPermissionsComponent.xml'
[2/1/2015 2:19:27 PM] [1] Loaded component 'Common Perf Counters ' with 2 task info blocks from 'res://CommonPerfCountersComponent.xml'
[2/1/2015 2:19:27 PM] [1] Loaded component 'Provision Server' with 9 task info blocks from 'res://ProvisionServerComponent.xml'
[2/1/2015 2:19:28 PM] [1] Loaded component 'All Active-Directory Roles Common' with 14 task info blocks from 'res://AllADRolesCommon.xml'
[2/1/2015 2:19:28 PM] [1] Loaded component 'Exchange 2003 Pseudo-MTA Configuration' with 1 task info blocks from 'res://LegacyMTAComponent.xml'
[2/1/2015 2:19:28 PM] [1] Loaded component 'Exchange 2003 SMTP VSI Configuration' with 1 task info blocks from 'res://LegacySMTPComponent.xml'
[2/1/2015 2:19:29 PM] [1] Loaded component 'Transport Perf Counters' with 21 task info blocks from 'res://TransportPerfCountersComponent.xml'
[2/1/2015 2:19:29 PM] [1] Loaded component 'Enable RPC-EPMAP firewall exception' with 1 task info blocks from 'res://RpcEpmapFirewallException.xml'
[2/1/2015 2:19:29 PM] [1] Loaded component 'Bridgehead Role Setter' with 1 task info blocks from 'res://BridgeheadRoleSetterComponent.xml'
[2/1/2015 2:19:29 PM] [1] Loaded component 'Transport Common Configuration' with 22 task info blocks from 'res://TransportCommonComponent.xml'
[2/1/2015 2:19:30 PM] [1] Loaded component 'Bridgehead Perf Counters' with 8 task info blocks from 'res://BridgeheadPerfCountersComponent.xml'
[2/1/2015 2:19:30 PM] [1] Loaded component 'Bridgehead Configuration' with 18 task info blocks from 'res://BridgeheadComponent.xml'
[2/1/2015 2:19:30 PM] [1] Loaded component 'Transport Log Search Service' with 1 task info blocks from 'res://TransportLogSearchServiceComponent.xml'
[2/1/2015 2:19:31 PM] [1] Loaded component 'Data Storage Configuration' with 1 task info blocks from 'res://DataStorageComponent.xml'
[2/1/2015 2:19:31 PM] [1] Loaded component 'Monitoring Service Configuration' with 5 task info blocks from 'res://MonitoringComponent.xml'
[2/1/2015 2:19:31 PM] [1] Loaded component 'Active Directory Topology Service Configuration' with 2 task info blocks from 'res://AllADRolesCommonServiceControl.xml'
[2/1/2015 2:19:31 PM] [1] Loaded component 'Bridgehead Service Configuration' with 3 task info blocks from 'res://BridgeheadServiceControl.xml'
[2/1/2015 2:19:32 PM] [1] Loaded component 'Transport Common Service Control' with 1 task info blocks from 'res://TransportCommonServiceControl.xml'
[2/1/2015 2:19:32 PM] [1] Loaded component 'All Roles Common Last' with 4 task info blocks from 'res://AllRolesCommonLast.xml'
[2/1/2015 2:19:32 PM] [1] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole 
[2/1/2015 2:19:32 PM] [1] Writing informational script to 'C:\ExchangeSetupLogs\Install-BridgeheadRole-20150201-1419320497.ps1'
[2/1/2015 2:19:32 PM] [1] Executing '$RoleIsClusterNode = $False', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsClusterNode = $False'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleRoles = "BridgeheadRole,ClientAccessRole,MailboxRole,AdminToolsRole"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleRoles = "BridgeheadRole,ClientAccessRole,MailboxRole,AdminToolsRole"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleIsAdminToolsRoleInstalled = $True', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsAdminToolsRoleInstalled = $True'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleNetBIOSName = "pgcvmexg"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleNetBIOSName = "pgcvmexg"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleInvocationID = "20150201-1419320497"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleInvocationID = "20150201-1419320497"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleInstallPath = "C:\Program Files\Microsoft\Exchange Server\"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleInstallPath = "C:\Program Files\Microsoft\Exchange Server\"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleStartTransportService = $True', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleStartTransportService = $True'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleLoggedOnUser = "chakfig\Administrator"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleLoggedOnUser = "chakfig\Administrator"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleInstallationMode = "BuildToBuildUpgrade"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleInstallationMode = "BuildToBuildUpgrade"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RolePreviousVersion = "8.2.176.2"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RolePreviousVersion = "8.2.176.2"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleIsMailboxRoleInstalled = $True', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsMailboxRoleInstalled = $True'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleBinPath = "C:\Program Files\Microsoft\Exchange Server\Bin"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleBinPath = "C:\Program Files\Microsoft\Exchange Server\Bin"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleSetupLoggingPath = "C:\ExchangeSetupLogs"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleSetupLoggingPath = "C:\ExchangeSetupLogs"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleFqdnOrName = "pgcvmexg"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleFqdnOrName = "pgcvmexg"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleTargetVersion = "8.3.83.6"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleTargetVersion = "8.3.83.6"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleUpdatesDir = "J:\EXSP01\SP3\Updates"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleUpdatesDir = "J:\EXSP01\SP3\Updates"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleIsClientAccessRoleInstalled = $True', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsClientAccessRoleInstalled = $True'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleRoleName = "BridgeheadRole"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleRoleName = "BridgeheadRole"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleDomainController = "PGCDC.chakfig.local"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleDomainController = "PGCDC.chakfig.local"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleProductPlatform = "amd64"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleProductPlatform = "amd64"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleIsBridgeheadRoleInstalled = $True', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsBridgeheadRoleInstalled = $True'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"'.
[2/1/2015 2:19:32 PM] [1] Found 136 tasks to execute
[2/1/2015 2:19:32 PM] [1] Processing component 'All Roles Common First - Run Once' (Configuring the server.).
[2/1/2015 2:19:32 PM] [1] Executing 'if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName = 'Installdw20shared.msilog'; } install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`" LOGVERBOSE=1");', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName = 'Installdw20shared.msilog'; } install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`" LOGVERBOSE=1");'.
[2/1/2015 2:19:32 PM] [2] Beginning processing.
[2/1/2015 2:19:33 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
[2/1/2015 2:19:33 PM] [2] PackagePath was set to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'; normalizing to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
[2/1/2015 2:19:33 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
[2/1/2015 2:19:33 PM] [2] Installing MSI package 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007.xml, Xml Node Name = _locDefinition
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge.xml, Xml Node Name = _locDefinition
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007_WinSrv2008.xml, Xml Node Name = _locDefinition
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge_WinSrv2008.xml, Xml Node Name = _locDefinition
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Set-WERRegistryMarkers;', handleError = False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-WERRegistryMarkers;'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:35 PM] [1] Processing component 'All Roles Common First' (Creating the Exchange server configuration in the Active Directory).
[2/1/2015 2:19:35 PM] [1] Executing '$RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames', handleError = False
[2/1/2015 2:19:35 PM] [2] Launching sub-task '$error.Clear(); $RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames'.
[2/1/2015 2:19:35 PM] [1] Executing 'Set-LocalPermissions', handleError = False
[2/1/2015 2:19:35 PM] [2] Launching sub-task '$error.Clear(); Set-LocalPermissions'.
[2/1/2015 2:19:35 PM] [2] Beginning processing.
[2/1/2015 2:19:49 PM] [2] Ending processing.
[2/1/2015 2:19:49 PM] [1] Executing 'get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true', handleError = False
[2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true'.
[2/1/2015 2:19:49 PM] [1] Executing 'get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true', handleError = False
[2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true'.
[2/1/2015 2:19:49 PM] [1] Executing 'get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true', handleError = False
[2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true'.
[2/1/2015 2:19:49 PM] [1] Executing '$mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile -MofFilePath:$mflFilePath;', handleError = True
[2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); $mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile -MofFilePath:$mflFilePath;'.
[2/1/2015 2:19:49 PM] [2] Beginning processing.
[2/1/2015 2:19:49 PM] [2] Exchange tracing provider was installed successfully.
[2/1/2015 2:19:49 PM] [2] Ending processing.
[2/1/2015 2:19:49 PM] [2] Beginning processing.
[2/1/2015 2:19:49 PM] [2] Exchange tracing provider was installed successfully.
[2/1/2015 2:19:49 PM] [2] Ending processing.
[2/1/2015 2:19:49 PM] [1] Processing component 'All Roles Precompile Management Binaries' (Pre-compiling management binaries.).
[2/1/2015 2:19:49 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/1/2015 2:19:49 PM] [2] Beginning processing.
[2/1/2015 2:19:49 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll" /verbose
[2/1/2015 2:19:50 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation.  All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll
All compilation targets are up to date.

[2/1/2015 2:19:50 PM] [2] Process standard error: 
[2/1/2015 2:19:50 PM] [2] Ending processing.
[2/1/2015 2:19:50 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/1/2015 2:19:50 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/1/2015 2:19:50 PM] [2] Beginning processing.
[2/1/2015 2:19:50 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll" /verbose
[2/1/2015 2:19:50 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation.  All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll
All compilation targets are up to date.

[2/1/2015 2:19:50 PM] [2] Process standard error: 
[2/1/2015 2:19:50 PM] [2] Ending processing.
[2/1/2015 2:19:50 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/1/2015 2:19:50 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/1/2015 2:19:50 PM] [2] Beginning processing.
[2/1/2015 2:19:50 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll" /verbose
[2/1/2015 2:19:51 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation.  All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll
All compilation targets are up to date.

[2/1/2015 2:19:51 PM] [2] Process standard error: 
[2/1/2015 2:19:51 PM] [2] Ending processing

[2/1/2015 2:20:07 PM] [2] Process standard error: 
[2/1/2015 2:20:07 PM] [2] Ending processing.
[2/1/2015 2:20:07 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.PowerShell.configuration.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/1/2015 2:20:07 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.PowerShell.configuration.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/1/2015 2:20:07 PM] [2] Beginning processing.
[2/1/2015 2:20:07 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.PowerShell.configuration.dll" /verbose
[2/1/2015 2:20:10 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation.  All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.PowerShell.configuration.dll
All compilation targets are up to date.

[2/1/2015 2:20:10 PM] [2] Process standard error: 
[2/1/2015 2:20:10 PM] [2] Ending processing.
[2/1/2015 2:20:10 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Management.SnapIn.Esm.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/1/2015 2:20:10 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Management.SnapIn.Esm.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/1/2015 2:20:10 PM] [2] Beginning processing.
[2/1/2015 2:20:10 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Management.SnapIn.Esm.dll" /verbose
[2/1/2015 2:20:12 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation.  All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Management.SnapIn.Esm.dll
All compilation targets are up to date.

[2/1/2015 2:20:12 PM] [2] Process standard error: 
[2/1/2015 2:20:12 PM] [2] Ending processing.
[2/1/2015 2:20:12 PM] [1] Processing component 'Bridgehead Permissions Configuration' (Setting folder and registry permissions).
[2/1/2015 2:20:12 PM] [1] Executing 'Set-LocalPermissions -Feature:"Bridgehead"', handleError = False
[2/1/2015 2:20:12 PM] [2] Launching sub-task '$error.Clear(); Set-LocalPermissions -Feature:"Bridgehead"'.
[2/1/2015 2:20:12 PM] [2] Beginning processing.
[2/1/2015 2:20:12 PM] [2] Ending processing.
[2/1/2015 2:20:12 PM] [1] Processing component 'Common Perf Counters ' (Configuring performance counters).
[2/1/2015 2:20:12 PM] [1] Executing 'new-perfcounters -DefinitionFileName ExchangeTopologyPerformanceCounters.xml', handleError = True
[2/1/2015 2:20:12 PM] [2] Launching sub-task '$error.Clear(); new-perfcounters -DefinitionFileName ExchangeTopologyPerformanceCounters.xml'.
[2/1/2015 2:20:12 PM] [2] Beginning processing.
[2/1/2015 2:20:12 PM] [2] Processing file: C:\Program Files\Microsoft\Exchange Server\Setup\Perf\ExchangeTopologyPerformanceCounters.xml
[2/1/2015 2:20:12 PM] [2] Performance counter name is Latest Exchange Topology Discovery Time in Seconds, type is NumberOfItems32.
[2/1/2015 2:20:12 PM] [2] Performance counter name is Number of Exchange Topology Discoveries, type is NumberOfItems32.
[2/1/2015 2:20:12 PM] [2] Performance counter name is Number of Siteless Servers, type is NumberOfItems32.

---------------------------------------------------------------------------------------------------------------------------------------------------------

Appreciate if someone can help us move forward in this scenario.
We have

1. disabled anti virus and tried.
2. removed watermarks and action entries in the registry
3. tried almost everything mentioned on google but i am not able to move forward.
Please help. we need this as part of our migration to Exchange 2013 for co-existence.
Thank you.
Philip

What are the comfy attributes (I don’t know), which makes MS Outlook first choice of user’s than Lotus Notes. It is right; correct me if I’m wrong.

This last weekend I installed Exchange 2010. Moved everyone over the same night to the new server. Mail flows in and out in ex 2010. The problem is I can't get the Public folders to replicate across. At the same time I found I can't send mail between the two exchange servers. In the message Queue on the Ex 2007 box I see the public folders are just sitting there waiting to be sent but stuck. Along with my test emails.

I found an artical that talks about going into ADSIEdit and delete the old exchange 2003 empty server folder. Did that and email is still not flowing.

Servers are in the same AD same subnet. ex 2007 is installed on a 2003 box. ex 2010 is on 2008r2.

Thanks,

Steve